Tesla 80 amp charge cable and plug - 23 ft (7m) - 2nd Gen HPWC
Click To Enlarge

This is a replacement 23 ft (7m) cable *and* Tesla plug assembly for the Tesla GEN-2 "Wall Connector" (HPWC). It can only used with Tesla cars in the North America market, as well as Japan, or with JDapter for use with J1772 cars. Of course, it could also be used in other countries, but only with a Tesla car using the North America / Japan charge inlet. That would include US Tesla cars imported to a country outside of the US.

 

DOES NOT INCLUDE TESLA CHARGE STATION

DOES NOT WORK WITH 2008-2011 TESLA ROADSTER CAR

 

This could also be used in a GEN-1 HPWC / Wall Connector with some minor adjustments. The GEN-2 unit is externally identified with a relief on the right side to store the plug. The GEN-1 unit does not have this relief.

 

The white plastic connector must be reused from the previous HPWC / Wall Connector GEN2 assembly, and will require a two crimp-on insulated butt connectors for 18-24 AWG wires. 

 

Do not use this cable at 80 amps unless all the building wiring that is powering the charge station is fully up to safety and electrical code for 80 amps.

 

Do not attempt to install this yourself unless you have proper training in electricity. Possibly property damage, or injury or death could result from mishandling this product.


We recommend using a properly licensed and bonded electrician who is familiar with Electric Vehicle charging equipment.

  • Item #: TPLUG80A23feet

Tesla 80 amp charge cable and plug - 23 ft (7m) - 2nd Gen HPWC

Price: $299.00
* Marked fields are required.
Availability: In-Stock
Qty: *
Reviews (0) Write a Review
No Reviews. Write a Review